PLX Devices Kiwi 2 Wifi - 2429 - Auto Tuning Store



PLX Devices Kiwi 2 Wifi – 2429

$99.99 $66.49

user guideKiwi 2 Wifi – OBDII to smartphone interface for iPhone, iPad, iPod Touch. Works with 1996 and later vehicles. Compatible with ELM327 apps including DashCommand, Rev, Dash, Roaders, Speedport, Harry’s Lap Timer Pro, BMWhat, OBIE, DragFX, ScanXL for PC and more. Plug and play and installs in seconds.

For iPhone, iPad, iPod Touch ONLY

SKU: 2429 Category: Tags: , , , ,



Kiwi 2 Wifi is a plug and play automotive tool that connects to the onboard diagnostic port (OBDII / CAN). This tool communicates and retrieves information from your car’s computer and wirelessly transmits to any iPhone, iPod Touch and iPad. It is compatible with 1996 and later vehicles and installs in seconds. The Kiwi 2 Wifi can efficiently monitor a vehicle’s MPG, data log engine parameters, read/reset engine trouble codes and monitor real time engine performance. Simply connect your device to the Kiwi 2 Wifi through a wifi connection, and launch the compatible app of your choice to obtain vital information about your vehicle.

The Kiwi 2 Wifi includes several improvements over the first generation award winning Kiwi 1 Wifi. It now comes with a sleek new design and is 0.25 inches thinner. The cable length has been reduced from 6 feet to 3 feet, making for a cleaner permanent installation. It incorporates an elm327 compatible interface and it works with ISO9141, VPW, PWM, and CAN protocols.

The Kiwi 2 Wifi incorporates a new advanced power saving circuit, designed to shut off power to essential functions of the unit allowing the Kiwi 2 Wifi to be permanently installed in your vehicle without draining your vehicle’s battery. After 5 minutes of inactivity, the Kiwi 2 Wifi automatically enters a low power sleep mode. To turn the unit back on, a simple press of the soft switch wakes the device back up.

The Kiwi 2 Wifi includes an 8 pin port on the back designed to be mated with the PLX iMFD Adapter. This allows you to connect high performance aftermarket sensors such as wideband air/fuel ratio, exhaust gas temperature, vacuum/boost, air intake temperature, fluid pressure and fluid temperature and view on your iOS mobile device. This solution is desired for applications where vehicles do not support certain sensors and/or the car’s computer does not report them. With the PLX iMFD Adapter attached, the best of both worlds of fully plug and play OBD2 / CAN data as well as high performance aftermarket sensors can be obtained.

Compatible Apps:

Kiwi OBD2 OBDII CAN Wireless Bluetooth Diagnostic Reader | iPhone

by Palmer PerformanceDash Command

Rev for Apple

by DevtoasterRev for Apple
by Big Block EntertainmentRoaders
by Autospeed Performance LLCSpeedport
ScanXL for PC
by Palmer PerformanceScanXL for PC
Harry’s Lap Timer Pro
by Harald SchlangmannHarrys Lap Timer Pro
by iViNiBMWhat
by TheAppleSeedStoreOBIE
Dash – Smarter Driving
by Dash Labs, Inc.Dash
Drag FX
by Big Block EntertainmentDrag FX







Technical Specs

Physical Dimensions : 1.25 x 2.72 x 0.60 inches

Power Consumption : 1.24 Watts (Typical), 0.1 Watt (Sleep)

Power Savings : Intelligent low power sleep circuitry

OBDII/CAN Protocol : ISO-9141, VPW, PWM, KWP 2000, 11 Bit CAN, 29Bit CAN

Compatible Vehicles : 1996 and later vehicles

Operating Temperature : 0 – 80 Degrees Celsius

Operating Voltage : 10 – 18V

Wireless Standard : Wifi 802.11 a/b/g

Range : -50ft line of sight

Enclosure : Automotive Grade Plastic

PLX Devices Kiwi 2 OBDII Car to Smartphone Interface


There are no reviews yet.

Be the first to review “PLX Devices Kiwi 2 Wifi – 2429”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back to top