PLX Devices Kiwi 2 Bluetooth - 2573 - Auto Tuning Store



PLX Devices Kiwi 2 Bluetooth – 2573

$99.99 $66.49

user guideKiwi 2 Bluetooth – OBDII to smartphone interface for Andriod, Symbian, N9 and PC. Works with 1996 and later vehicles. Compatible with ELM327 apps including Torque, DashCommand, Dash, OBD Autodoctor, OBD Droidscan Pro, Drag FX, alOBD ScanGenPro, ScanXL for PC and more. Plug and play and installs in seconds.For Andriod, Symbian, N9 and PC
Not for use with Apple Devices



Kiwi 2 Bluetooth is a plug and play automotive tool that connects to the onboard diagnostic port (OBDII / CAN). This tool communicates and retrieves information from your car’s computer and wirelessly transmits to any Android, Smybian, N9, Linux, or PC. It is compatible with 1996 and later vehicles and installs in seconds. The Kiwi 2 Bluetooth can efficiently monitor a vehicle’s MPG, data log engine parameters, read/reset engine trouble codes and monitor real time engine performance. Simply connect your device to the Kiwi 2 Bluetooth through a Bluetooth connection, and launch the compatible app of your choice to obtain vital information about your vehicle.
The Kiwi 2 Bluetooth includes several improvements over the first generation award winning Kiwi 1 Bluetooth. It now comes with a sleek new design and is 0.25 inches thinner. The cable length has been reduced from 6 feet to 3 feet, making for a cleaner permanent installation. It incorporates an elm327 compatible interface and it works with ISO9141, VPW, PWM, and CAN protocols.

The Kiwi 2 Bluetooth incorporates a new advanced power saving circuit, designed to shut off power to essential functions of the unit allowing the Kiwi 2 Bluetooth to be permanently installed in your vehicle without draining your vehicle’s battery. After 5 minutes of inactivity, the Kiwi 2 Bluetooth automatically enters a low power sleep mode. To turn the unit back on, a simple press of the soft switch wakes the device back up.

The Kiwi 2 Bluetooth includes an 8 pin port on the back designed to be mated with the PLX iMFD Adapter. This allows you to connect high performance aftermarket sensors such as wideband air/fuel ratio, exhaust gas temperature, vacuum/boost, air intake temperature, fluid pressure and fluid temperature and view on your Android mobile device. This solution is desired for applications where vehicles do not support certain sensors and/or the car’s computer does not report them. With the PLX iMFD Adapter attached, the best of both worlds of fully plug and play OBD2 / CAN data as well as high performance aftermarket sensors can be obtained.

Kiwi 2 OBD2 OBDII Wireless Bluetooth Diagnostic Scanner | Android

Compatible Apps:
by Palmer Performance
by Ian Hawkins
OBD Autodoctor
by Creyosys
OBD Droidscan Pro
by MockOne Performance
Drag FX
by Big Block Entertainment
alOBD ScanGenPro
by Alexandre Beloussov
Dash – Smarter Driving
by Dash Labs, Inc.
ScanXL for PC
by Palmer Performance


Technical Specs

Physical Dimensions : 1.25 x 2.72 x 0.60 inches

Power Consumption : 1.24 Watts (Typical), 0.1 Watt (Sleep)

Power Savings : Intelligent low power sleep circuitry

OBDII/CAN Protocol : ISO-9141, VPW, PWM, KWP 2000, 11 Bit CAN, 29Bit CAN

Compatible Vehicles : 1996 and later vehicles

Operating Temperature : 0 – 80 Degrees Celsius

Operating Voltage : 10 – 18V

Wireless Standard : Bluetooth versions 2.1/2.0/1.2/1.1

Range : -50ft line of sight

Enclosure : Automotive Grade Plastic

PLX Devices Kiwi 2 OBDII Car to Smartphonbe Interface


There are no reviews yet.

Be the first to review “PLX Devices Kiwi 2 Bluetooth – 2573”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back to top